- Home /
- CES Traditional Screed Northern Ireland - Building Supplies
CES Traditional Screed
Our traditional screed is manufactured to BS EN 13813 and made from a blend of sands, CEMII cement and retarding agent as standard, which makes for a screed that is easy to level and finish, providing a level base for the follow on trades.
Heavy Duty Screed
This is a higher strength screed and incorporates a fine aggregate to increase impact and abrasion resistance necessary, in heavily trafficked areas.
This is a traditional screed, with the addition of polypropylene fibres, which can be used as a replacement for non-structural steel mesh. The introduction of fibre into the screed reduces plastic shrinkage, increases the screed bond and increases the impact and abrasion resistance.
Fast Drying Screed
We can offer a plant batched fast drying screed with drying times from 14 days upwards depending on depth, ambient temperature and relative humidity. This fast drying screed allows jobs to be fast tracked and allows floor coverings to be applied long before standard screed.
- Technical Specs
Days to dry
STANDARD SAND : CEMENT SCREED 80mm 100mm 100mm 1mm/day (1st 40mm the 0.5mm/day 160 Days 1.1W/mK HEAVY DUTY SAND : CEMENT 80mm 100mm 100mm 1mm/day (1st 40mm the 0.5mm/day 160 Days 1.1W/mK FIBRE REINFORCED SAND : CEMENT 65mm 75mm 75mm 1mm/day (1st 40mm the 0.5mm/day 110 Days 1.1W/mK QUICK DRYING SAND : CEMENT 75mm 75mm 75mm 3.5mm/day 21 Days 1.1W/mK
*Drying rates are based on temp of 20 degrees Celsius and RH 60%.
- Deliveries / Collection
Deliveries / Collections
Deliveries are made mostly by tipper truck and service the greater Belfast area and the majority of counties including Down, Antrim and Armagh. As per concrete collection, no prior notice is required as we have a pan mixer dedicated to screed.
For further information or advice on your floor screed needs please give us a call on 028 9751 9494. Alternatively see our Supply & Lay flyer or our CES Liquid Screed flyer for further products and services available from CES.