Flotherm is a superior flowing screed designed to maximise the benefits of under floor heating. With its high flow properties Flotherm fully encapsulates heating pipes to maximise heating transfer.
Simple and fast to install – areas of 2000m2 can be installed daily by pump. Coupled with thinner screed thickness, compared to traditional sand:cement screeds, Flotherm offers unrivalled heat response times resulting in greater thermal efficiency. Flotherm's low shrinkage and high flexural strength ensures floors are virtually jointless and crack-free.
Flotherm is a thermal anhydrite based flowing screed. As such the binder is a sustainably sourced by-product from the flue gas desulphurisation of power plants. Outperforming traditional screeds, Flotherm screeds typically exhibit a compressive strength of 25MPa and flexural strength of 5MPa.
- Greater thermal efficiency
- Fast installation
- Superior performance
- Low shrinkage
- Practically jointless and crack-free
- Quality approved suppliers and installers
- 100% Recyclable
- Binder class – CAB40 to EN13454
- Screed class – typically CA-C25-F5 to EN13813
- Suitable for receiving all common floor finishes including: carpet; timber; tiles and vinyl.
- Can be coloured and directly finished to provide a hardwearing floor, with or without decorative stone.
